Table of Contents
Advertisement
15.
Always
keep the machine in good working order. Keep the cutting faces sharp and clean for optimum
performance. Follow the instructions for cleaning, lubricating and replacing accessory
16.
Always
disconnect the machine from the mains before carrying out any maintenance work or replacing
machine parts such as saw blade, drill bits, cutting tools
17.
Only
use the recommended accessories. Follow the instructions in the User Manual. The use of
unsuitable accessories may cause
18.
Prevent
any accidental starting. Before connecting the equipment to the mains, always check that the
operating switch is in OFF position
19.
Never stand on the machine. Any tipping over of the machine or contact with the cutting tool can result
in very severe accidents.
20.
Check
for damaged parts. Damaged guards or parts should be properly repaired or replaced before
further
operation.
21.
Never
leave a running machine unattended. Always switch off the mains supply. Do not leave the
machine unattended until it has come to a complete
22.
Never
operate the machine if you are under the influence of alcohol, medication or
Always wear safety glasses!
etc.
accidents.
(O).
standstill.
equipment/tools.
drugs.
3
Advertisement
Table of Contents
