Carrier CRHEATER101A00 Installation Instructions Manual page 14

Fig. 10 — TB10 Locations and Connections (STD SCCR Only)
Rain Shield
Attach Rain Shield
With (3) Screws
Thru Back Of SPB Box
Fuse Block
Access Cover
NOTE: Due to length, some component wiring may need to be disconnected and rewired throught the rain shield grommet.
Fig. 11 — High SCCR Single Point Box Assembly — Rain Shield
Terminal Block
Access Hole
Wire Tie or Grommet
For ODF, Crankcase
Heater or Other Wires
14
HEATER
363A00
Add Seal Strip To Assembly
Prior To Installing Into Unit