Operation; Led Indication; Warranty Conditions - GSL electronics RBC-12-NG Installation & Operating Instructions

Models:
RBC-12-NG & RBC-24-NG
Page 4 of 4
the braking and a counter-clockwise will decrease it.
To activate the override function, simply push on the adjustment knob. Releasing the knob disables the function.
when the override is active, the braking force is still determined by the knob position.
The override function works to apply the trailer brakes without applying the vehicle brakes. This feature can be used when the tow
vehicle begins to sway or enter a tail wag situation. Please consult towing professionals or towing training schools for advice on
how to use this feature correctly. In the event of an emergency situation, do not rely on the override button for additional braking

LED Indication

Warranty Conditions: Our products come with guarantees that cannot be excluded under the Australian Consumer Law.
The customer is entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
amount to a major failure.
of two (2) years from the date of the original purchase by the customer as marked on the customer's original invoice.
Page 4 of 4
Installation & Operating Instructions
Please read these instructions before use
Trailer connected / brakes connected / all systems OK
Either : Brake pedal pressed, controller activley braking
Override has been pressed
No power or trailer disconnected from vehicle
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
More information https://www.caravansplus.com.au
Status
RBCNG-R2