Advertisement
Step5. Connect an IR Receiver to the IR IN port, and an IR Emitter to the IR OUT port. The IR signal can be transmitted bi-
directionally between IBT45 and HDMI Twisted Pair PoC Receiver(s).
If you want to cascade IR signal among several IBT45, connect the IR LOOP socket of one of them and the IR IN socket
of the next until all IBT45 have been connected.
Step6. Connect a DC 24V power adapter to the power port of IBT45, HDMI Twisted Pair PoC Receiver is able to be energized
by IBT45 with PoC solution.
Step7. Connect Ethernet cable to its port and connect it to nearest switch/router.
1.3 Cascade Connection
1.3.1 Cascade AV Signal
HDMI source signal can be cascaded to several displayers via HDMI OUT/ IN.
Connect the HDMI OUT socket of the first ibt45 to HDMI IN socket of the next until all IBT45 have been connected.
HDMI signals delivered within the first IBT45 are able to be outputted to other connected IBT45 too.
1.3.2 Cascade Control Signal
IBT45 supports control cascading via IR LOOP/ RS232 LOOP to enable signal loop output. Users can choose one or multiple
cascade methods according to their specified needs.
www.intellitechglobal.com
Email – sales@intellitechglobal.com
Address: 12/4 Koala Town Road, Upper Coomera , QLD 4209, Australia
Advertisement
