Advertisement
7 Maintenance
Problems
The fixture do
not work
LED dimmed
No DMX input
Par Light Set
works
abnormality
www.leahualight.com
Check list
1. If your power as same as the input
of the machine.
2. If the fuse was broken.
If your power us same as the input
of the machine
1. If the polarity is opposited in the
DMX controller.
2. If it is in DMX mode.
3. If there are 2 Master in a loop.
1. Check if the serial is correct on
the Par Light display
Trouble Shooting
1. Make sure the voltage.
2. Replace the same fuse.
Make sure the voltage
input.
1. Correct the DMX
polarity.
2. Change to the DMX
mode.
3. Set one piece into
Slave mode.
1. Set the right serial No
on the single Par
Light
5
Advertisement
