Page 1
User manual BW-0520 www.liden.weighing.com...
Page 2
Front panel User manual Backlight selection 1. No backlight: Press lasting 3 seconds, it displays “OFF” 2. Auto backlight: Press lasting 3 seconds, it displays “ON” Backlight function will be active while loading. 2.Keypad function Press to turn the scale on or off. 1.Power on: Press this key briefly 2.Power off: Press this key lasting 2 seconds and it will display OFF.
Page 3
Pre-tare function (Hold down lasting 3 seconds) 1. In zero mode, hold down this key lasting 3 seconds. Key in the known weight and press key. The screen displays the negative weight after Pre- taring. Press to cancel this function. 2.
Page 4
Replace battery: DO NOT USE rechargeable battery! If you do so, they must recharge in external charger. The main adapter cannot recharge the battery when they are in the scale. 1. Turn the scale over and loose two screws (1,2). Then move the indicator. 2.
Page 5
How to separate the indicator 1. Turn the scale over and loose two screws(1,2) 2. Open the signal cable box cover as arrow. 3. You could place the indicator in the desk or wall- mounted. 4. Close the cover of the signal cable box. 2020-06-10...
Need help?
Do you have a question about the BW-0520 and is the answer not in the manual?
Questions and answers