Main Power Connection; Digital Control Panel - iHealth Lite Owner's Manual

MAIN POWER CONNECTION

All heater cable plug
ends are clearly
marked: A B C D
The corresponding
outlets on the
main control unit are
clearly marked.
Plug the cables into
the corresponding
sockets.

Digital Control Panel

Operating Instructions
• Press quickly to switch the sauna on to stand by mode.
• Set the desired temperature using the TEMP
• Set the time to desired length using the TIME
• Press quickly a second time to activate the heaters.
• When TIME reaches '00', all the heaters will automatically shut off .
• Press and hold to switch the sauna off .
The Auto Function
• Press once.
• Set the desired temperature.
• Set the sauna session length.
• Press AUTO butt on.
• TEMP becomes hours ahead. TIME becomes minutes ahead.
• Your sauna will begin heating aft er the programmed time has elapsed.
A B C D
butt ons.
butt ons.
Plug in
LAMP
LED's
Plug in the (6 pins)
white control panel
cord into the main
control unit.
Light 1 Light 2
11