LG PF510Q Owner's Manual page 98

[Use Wireless Speaker]
(Q. Settings) →
[Bluetooth Device]
You can connect wirelessly a Bluetooth audio device or a Bluetooth headset to enjoy
your projector's sound in richer quality and greater convenience.
Refer to the user manual of the Bluetooth audio device for details on how to connect
and use the device.
• Press to view the connected devices or any devices that can be connected
and connect to any one of them.
•
LG Sound Sync devices will automatically try to connect to the recently used
devices when you turn the projector on.
• We recommend that you connect an LG audio device that supports LG Sound
Sync, using LG TV mode or LG Sound Sync mode on device.
• Some models may not be supported.
•
The audio codec that can be output via Bluetooth is SBC/aptX™.
• If the device fails to connect, check the power of the device to connect to and
check if the audio device is working properly.
•
Using a Bluetooth headset is recommended when you connect two Bluetooth
devices.
• Depending on the type of the Bluetooth device, the device may not connect
correctly or an abnormal behavior may occur such as unsynchronized video and
audio.
– The mobile-only headsets may not work.
– If two different Bluetooth devices are connected and used at the same time,
the voice may not match.
• Sound may stutter or sound quality may be reduced if:
– the Bluetooth device is too far from the projector;
– there are obstacles between the Bluetooth device and the projector; or
– used together with radio equipment such as a microwave oven or wireless
LAN.
If [Picture] → [Select Mode] is [Game Optimizer] and [Sound Out] is set to
•
[Bluetooth Device], [Picture] → [Select Mode] is changed to [Standard].
•
If you continue to experience problems, we recommend using a wired connection.
(HDMI (ARC) port)
→ [Sound] → [Sound Out] → [Use Wireless Speaker]
55