Table of Contents
Advertisement
Fault
The water is not draining.
Water is not flowing in. De-
tergent is not being dis-
pensed.
The spin cycle runs several
times.
Cause
Drain pump is blocked.
– – – – is activated.
The water outlet hose is con-
nected too high.
Detergent dosage is too
high.
Unapproved extension in-
stalled on the water drain
hose.
You have not pressed inicio
pausa + carga.
The filters in the water inflow
are blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
The unbalanced load detec-
tion system eliminates an im-
balance by repeatedly redis-
tributing the laundry.
Troubleshooting en
Troubleshooting
→ "Cleaning the drain pump",
▶
Page 43
Continue the programme by select-
▶
ing
or
and pressing inicio
pausa + carga.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 38
Install the water outlet hose at a
▶
maximum height of 1 metre.
→ "Technical specifications",
Page 60
Immediate measure: Mix one table-
▶
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the left-hand compartment (not
for outdoor clothing, sportswear or
items stuffed with down).
Reduce the amount of detergent for
▶
the next washing cycle with the
same load.
Remove any unapproved exten-
▶
sions from the water hose.
→ "Connecting the appliance",
Page 17
Press inicio pausa + carga.
▶
"Clean the filters in the water in-
▶
flow" → Page 46.
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
Not a fault – no action required.
▶
Note: When loading, where possible,
place large and small items of laundry
together in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
51
Advertisement
Table of Contents
