Table of Contents
Advertisement
TOP RETAINING
CLIP
ANT CONNECTOR
BOTTOM
LEFT SLIDE
CLIP
6. Sirius Program Listening Options
The Shuttle and Cradle provide an audio output
signal in three manners:
1. When using CK1 or CK2 cradle, the audio signal
can be routed through an audio cable which is
applied to the auxiliary inputs of a radio or
entertainment system.
2. When using the CK1 cradle, the audio signal can
be transmitted to a car radio on one of four
selectable FM frequencies. The audio signal can
then be played through your car radio when the
car radio is tuned to one of these frequencies.
3. Some listeners prefer to use a hard-wired FM
transmitter. In this instance, when using the CK1
cradle, an optional FM Switching Box assembly
16-PIN SYSTEM
CONNECTOR
(Part No. SIR-SWB) is available and provides a
hard-wired FM output when connected to the FM OUT
connector on the left side of the cradle; the other end
of the switching box plugs into the antenna jack of your
radio. By using this assembly, and selecting the
BOTTOM
appropriate FM output frequency (88.1MHz, 88.3MHz,
RIGHT
88.5MHz or 88.7MHz) with the slide switch, the Sirius
SLIDE CLIP
signal received at the ANT cradle antenna input can be
played through your car radio when tuned to one of
these frequencies.
SHUTTLE
CRADLE
CK1
-10-
FM OUT
AUDIO OUT
DC 12V
ANT
FM FREQUENCY
SELECT SLIDE
SWITCH:
88.1 MHz
88.3 MHz
88.5 MHz
88.7 MHz
128-7061B
10 of 14
Advertisement
Table of Contents
