Kathy Ireland 1591VA-48-241-900-SR Assembly Instructions Manual page 16

INSTALLATION INSTRUCTIONS (Undermount Sink)
2. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
down onto a scratch free surface such as a
foam sheet that came in the packaging.
3. Apply silicone caulk (not included) to
the top edge of sink (D). With the help of
another adult, lower the sink onto the back
side of the stone top.
Make sure the sink over-flow hole is facing
the front of stone top.
Be sure to align the sink well with the stone top
cut out allowing for equal stone overhang on the
front, back and sides of the ceramic sink (D).
Note: To install the sink onto the top correctly,
ensure that the two "BACK" stamps on the sink
and the top are aligned on the same sides.
Use the guide lines marked on the sink and
bottom side of stone top to assist with sink
location.
2
C
Remove the top and place it
on a scratch free surface
3
D
2
B
16
Foam sheet
Remove the top foam sheet
C
Remove the backsplash and place
it on a scratch free surface
B
Remove the foam sheet
2
1
B
Hardware
Pack
Remove the cutout foam
sheet & hardware
B
Foam sheet
1
2