Samsung HW-S801B Full Manual page 10

6 Press the button to display information about the current function. (See page 7)
When connected to Dolby Atmos®, the LED indicator blinks cyan 3 times.
Info
7 By pressing the button, you can select the desired audio mode. Each time the mode changes, the Multicolor LED
blinks in white.
SOUND MODE
• Surround
• Game
• Standard
• Adaptive Sound
• DTS Virtual:X
8 Push the button up or down to adjust the volume.
VOLUME
9 Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the woofer
(bass) volume level to 0 (Default), press the button.
WOOFER (BASS)
LEVEL
10 Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.
Bluetooth PAIR
11 By pressing the button, you can adjust the volume of the each speaker.
• To control the volume of the each speaker select "Center Level" or "Front Top Level" in Sound Settings, and
CH LEVEL
• If the Rear Speakers (sold separately) are connected, the setting "Rear Level" and "Rear Top Level" is
LED indicator
Provides a wider sound field than standard.
Provides stereoscopic sound to immerse you in the action while gaming.
Outputs the original sound.
Analyzes the content in real time and automatically provides the optimal sound field based on the
characteristics of the content.
Immersive 3D sound from any content.
LED indicator
LED indicator
then adjust the volume between -6~+6 by using the Up/Down buttons.
supported. To adjust the volume of the "Rear Level" and "Rear Top Level" between -6 to +6 by using the Up/
Down buttons.
LED indicator
White Blinks X1
"Surround" → "Game" → "Standard" → "Adaptive Sound" →
"DTS Virtual:X"
White moves to right X1
Volume Up
Red → Green →
Blue Blinks
Pairing
"Ready to connect via Bluetooth."
White Blinks X1
"Center Level" → "Front Top Level"
ENG - 10
White moves to left X1
Volume Down
Cyan Blinks X3
Connection is complete