Table of Contents
Advertisement
Available languages
Available languages
STARTUITSTEL/DÉPART DIFFÉRÉ
With this option you can delay the start of a
programme by 3, 6 or 9 hours.
SETTINGS
EXTRA RINSE
With this option you can permanently have an
extra rinse when you set a new programme.
•
To activate/deactivate this option touch the
buttons Cetrifugeren/Essorage and Snel/
BEFORE FIRST USE
1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton at the
highest temperature without laundry.
DAILY USE
WARNING! Refer to Safety chapters.
LOADING THE LAUNDRY
Open the water tap. Connect the mains plug to the
mains socket.
1. Pull the door handle to open the appliance
door.
2. Put the laundry in the drum, one item at a time.
3. Shake the items before you put them in the
appliance.
Make sure not to put too much laundry in the drum.
Refer to max. loads indicated in "Programme chart".
4. Close the door.
10
The indicator of selected delay comes on.
This removes all possible dirt from the drum and the
tub.
USING DETERGENT AND ADDITIVES
DETERGENT COMPARTMENTS
CAUTION!
Make sure
that no laun-
dry stays be-
tween the
seal and the
door. There
is a risk of
water leak-
age or dam-
age to the
laundry.
Rapide at the same time until the indicator
comes on/goes off.
Detergent compartment for
washing phase.
If you use liquid detergent, put it
immediately before you start the
programme.
Compartment for liquid additives
(fabric conditioner, starch).
CAUTION! Do not
exceed the MAX
level.
Flap for powder or liquid deter-
gent.
1. Measure out the de-
tergent and the fabric
conditioner.
2. Put the detergent
and the fabric condi-
tioner into the com-
partments.
3. Carefully close the
detergent drawer.
Advertisement
Table of Contents
