Vivotek CC8160 User Manual page 176

Compact cube network camera
Table of Contents

Advertisement

VIVOTEK
7.10 IR cut control
Group: ircutcontrol
(capability.nvideoinprofile> 0 and capability_daynight_c<0~(n-1)>_support > 0)
n denotes the value of "capability_nvideoin"
NAME
mode
sir
<product dependent>
daymodebegintime
daymodeendtime
disableirled
enableextled
extledmode
bwmode
sensitivity
176 - User's Manual
VALUE
SECURITY
(get/set)
auto,
6/6
day,
night,
di,
schedule
<product
dependent>
<boolean>
6/6
00:00~23:59
6/6
00:00~23:59
6/6
<boolean>
6/6
<boolean>
1/6
do, irring
6/6
* Available values
are listed in
"capability_daynight
_c<0~(n-1)>_extle
d_interface"
<boolean>
6/6
low, normal, high
6/6
(if
capability_daynight
_c<0~(n-1)>_ircut
sensitivity_type=op
tions)
DESCRIPTION
Set IR cut control mode
Enable/disable Smart IR
* Only available when
"capability_daynight_c<0~"capability_nvideoi
n"-1>_smartir" is 1
Day mode begin time
Day mod end time
Enable/disable built-in IR led
(capability_daynight_c<0~"capability_nvideoi
n"-1>_buildinir > 0)
Enable/disable external IR led
(capability_daynight_c<0~"capability_nvideoi
n"-1>_externalir > 0)
Turn on an external IR led which is mounted do
(digital output) device or is a IR ring device.
* Only available when
"capability_daynight_c<0~"capability_nvideoi
n"-1>_externalir" is 1.
* Only valid when "ircutcontrol_enableextled"
is 1.
Switch to B/W in night mode if enabled
Sensitivity of day/night control.
There are two value format:
"low,normal,high": if
capability_daynight_c<0~(n-1)>_ircutsensiti
vity_type=options

Advertisement

Table of Contents
loading

Table of Contents