Table of Contents
Advertisement
s<0~(m-1)>_h
0~2
264_profile
s<0~(m-1)>_h
<boolean>
265_dintraperio
d_enable
s<0~(m-1)>_h
250, 500, 1000, 2000, 3000, 4000
265_intraperiod
s<0~(m-1)>_h
cbr, vbr
265_ratecontrol
mode
s<0~(m-1)>_h
1~5,
265_quant
99, 100
s<0~(m-1)>_h
0~51
4_maxframerate"
1/4
Indicate H264 profiles
0: baseline
1: main profile
2: high profile
4/4
Enable "Dynamic intra frame period".
* Only available when
"capability_videoin_c<0~(n-1)>_dint
raperiod_support" is 1 and h265 is
listed in "capability_videoin_codec".
* We support this parameter when the
version number (httpversion) is equal
or greater than 0301c.
4/4
The time interval between two
I-frames (Intra coded picture).
The unit is millisecond (ms).
* Only available when h265 is listed in
"capability_videoin_codec".
4/4
cbr: Constant bit rate mode.
vbr: Fixed quality mode, all frames are
encoded in the same quality.
* Only available when h265 is listed in
"capability_videoin_codec".
4/4
Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in "qvalue"
* Only available when h265 is listed in
"capability_videoin_codec" and
"ratecontrolmode"= vbr.
4/4
Manual video quality level input. The Q
VIVOTEK
User's Manual - 159
Advertisement
Table of Contents
