Download Print this page
Haws SP158.15 Installation, Operation & Maintenance Instructions Manual

Haws SP158.15 Installation, Operation & Maintenance Instructions Manual

Freeze protection valve

Advertisement

Quick Links

1455 Kleppe Lane Sparks, NV 89431-6467  (775) 359-4712 Fax (775) 359-7424
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
HAWS warrants that this specific product is guaranteed against defective material or poor workmanship
for a period of one year from date of shipment. HAWS liability under this warranty shall be discharged
by furnishing without charge F.O.B. HAWS Factory any goods, or part thereof, which shall appear to the
Company upon inspection to be of defective material or not of first class workmanship, provided that claim
is made in writing to Haws within a reasonable period after receipt of the product. Where claims for
defects are made, the defective part or parts shall be delivered to the Company, prepaid, for inspection.
HAWS will not be liable for the cost of repairs, alterations or replacements, or for any expense connected
therewith made by the owner or his agents, except upon written authority from HAWS, Sparks, Nevada.
HAWS will not be liable for any damages caused by defective materials or poor workmanship, except for
replacements, as provided above. Buyer agrees that Haws has made no other warranties either
expressed or implied in addition to those above stated, except that of title with respect to any of the
products or equipment sold hereunder and that HAWS shall not be liable for general, special, or
consequential damages claimed to arise under the contract of sale.
The emergency equipment manufactured by HAWS is warranted to function if installation and
maintenance instructions provided are adhered to. The units also must be used for the purpose for which
they were intended. This product is intended to supplement first-aid treatment. Due to widely varying
conditions, Haws cannot guarantee that the use of this emergency equipment will prevent serious injury
or the aggravation of existing or prior injuries.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED OR GIVEN BY
HAWS.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS MODEL,
PLEASE CALL:
FOR PARTS CALL:
03/21
E-mail:
haws@hawsco.com
Model SP158.15
Freeze Protection Valve
LIMITED WARRANTY
1-800-766-5612
1-800-640-4297
Model SP158.15
 website:
www.hawsco.com
No. 0510001069 (2)
Page 1 of 8

Advertisement

loading

Summary of Contents for Haws SP158.15

  • Page 1 HAWS warrants that this specific product is guaranteed against defective material or poor workmanship for a period of one year from date of shipment. HAWS liability under this warranty shall be discharged by furnishing without charge F.O.B. HAWS Factory any goods, or part thereof, which shall appear to the Company upon inspection to be of defective material or not of first class workmanship, provided that claim is made in writing to Haws within a reasonable period after receipt of the product.
  • Page 2 (only needed for severe outdoor exposure to UV) LOCATION OF UNIT: • The Model SP158.15 Freeze Protection Valve is intended for use only with the 8315CTFP series of emergency showers, and may be installed as follows: As a standalone accessory directly on an 8315CTFP shower, OR...
  • Page 3 The slits in the insulation here allow the insulation to be folded back – find the galvanized cap over the auxiliary outlet and remove it with slip-joint pliers or a pipe wrench. 03/21 Model SP158.15 Page 3 of 8...
  • Page 4 The purpose of these zip ties is to ensure that the heat trace maintains solid contact with the piping as continually as possible – make sure the heat trace is ideally positioned before tightening down the zip ties. 03/21 Model SP158.15 Page 4 of 8...
  • Page 5 If the insulation is to be exposed to severe levels of UV (e.g. a rooftop installation), consider applying a protective coating or cladding (such as K-FLEX 374 or K-FLEX Clad) to the insulation. f) If desired, connect the valve drain to a drain line. 03/21 Model SP158.15 Page 5 of 8...
  • Page 6: Troubleshooting Procedure

    Check if heat trace is contacting piping in the freezing area. Consult 8315CTFP troubleshooting guide. Corporation – All Rights Reserved ® © 2021 Haws ® HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. 03/21 Model SP158.15 Page 6 of 8...
  • Page 7 DATE: 04/19/21 SCALE: DRAWING TYPE: PARTS BREAKDOWN SIZE: A SHEET 1 OF 1 © 2021 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation. PAGE 7 OF 8...
  • Page 8 CONSULT THE SP121 DOCUMENTATION) REVISION 09/17/20 APPROVED: DATE: 04/19/21 SCALE: DRAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 © 2021 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.