Wall Mounting - Huawei Camera 500 Manual

Wall-Mounting
The Camera 500 can also be installed on a wall if the display is wall-mounted.
Use the included plastic expansion bolts, L-shaped bracket, base, 1/4"-20 UNC screw, and M3 x 6
Phillips flat head machine screws. You will need a hammer drill, hammer, rechargeable
battery-powered electric screwdriver, and Phillips screwdriver.
1
Secure the plastic expansion sleeves to the wall.
Hole diameter: 8 mm (0.31 in.)
Hole depth: 55 mm (2.17 in.)
3
Install the base.
5
Connect the cables and route them out of the
hole in the L-shaped bracket by referring to
section "Connecting Cables".
150mm (5.91 in.)
2
Screw the L-shaped bracket with the
tapping screws.
4
Screw the base with M3 x 6 Phillips flat
head machine screws.
6
Tie the cables together. (The color of
the cable you use may differ.)
3