Remote Control - Acer AT3203 Service Manual

Remote Control

8
1. Power: Press to turn on/off your TV.
2. Mute: Press to toggle audio on and off
3. VOL (up/down): Press this button to
increase or decrease the volume.
4. CH (up/down): Press this button to
sequentially select the TV channel.
5. Number keys
6. RECALL: Press to confirm channel
number selection.
7. ENTER: Press to confirm channel number
selection.
8. Input buttons (TV/AV/SCART/PC): Press
to select correct input mode.
9. SLEEP: Press to set a time period after
which the TV will switch itself to stand-by
(15, 30, 45, 60, 90)
10.FREEZE: Press to freeze the displayed
picture.
11.DISPLAY: Press to display input/channel
information (dependent on input/source
type).
12.WIDE: Press to toggle scaling mode
between 4:3, 16:9, Panorama and
Letterbox 1, 2, 3.
13.MENU: Press to open or close the Menu.
14.e (Empowering technology): Activate Acer
Empowering Technology.
15.Directional keys/OK
16.MPX: Press to select the sound input,
displayed in the top right-hand corner
(mono, stereo, bilingual).
17.PIP/PBP/POP: Switch between PIP/PBP/
POP mode.
18.SWAP: For PIP/PBP/POP mode, toggle
between the primary and subscreens.
19.ACTIVE: Toggle between primary and
subscreens.
20.SIZE/MODE: You can change subscreen
size in PIP mode. In POP mode, you can
switch POP mode from 1+5 to 1+12.
21.POSITION: In PIP mode, you can change
subscreen position.
Chapter 1