Setup; Language Settings; Display Settings - Coby DVD-283 Instruction Manual

Enter Setup mode to adjust the various internal settings
of the player. Make sure the player has been completely
stopped before entering Setup mode.
1. Press SETUP to enter Setup mode.
2. Use the Navigation Keypad to select a desired item.
3. Press to confirm a selection.
4. Press SETUP to exit Setup mode (or select EXIT
and press ).

Language Settings

Use the Navigation Keypad to highlight the desired language selection and press
Item
OSD
Disc Menu
Audio
Subtitle

Display Settings

Use the Navigation Keypad to highlight the desired display selection and press
Item
TV Display
TV System
Video Out
HDMI Video
Angle Mark
www.cobyusa.com www.cobyusa.com

SETUP

Description
Sets the language of the player's on-screen
display.
Sets the default menu language of loaded DVDs.
Sets the default language audio track of loaded
DVDs.
Sets the default subtitle track of loaded DVDs.
Description
Sets the aspect ratio of the display. 4:3 is used
with standard television displays; 16:9 is used
with widescreen television displays.
Sets the player's Video Out signal type. Set this
to correspond with your TV's Video System type.
NTSC is the standard used in North America.
Sets your player's video output mode. Set this to
correspond with the type of connection used with
your TV.
S-Video+CVBS: S-Video or Composite Video
P-Scan: Component Video (Progressive Scan)
YUV: Component Video
Sets the HDMI video output mode. HDMI Video
must be enabled for DVD upconversion.
Displays an on-screen prompt whenever an alter-
nate angle becomes available for viewing (press
ANGLE to view).
to confirm.
Default Setting
English
English
English
English
to confirm.
Default Setting
4:3L-Box (Letterbox)
NTSC
S-Video+CVBS
Auto
On
Page  Page