Maintenance - Miele DOS G 80 Fitting Instructions Manual

Colour coding on
the dispensing
hoses
Connecting the
power supply
DOS G 80/72
Fill or replace the container, fit the siphon and secure the lid.

Feed the siphon into the canister until it reaches the bottom.

Follow the instructions for venting the dispensing system and set-
ting the dosage in the operating instructions.
To differentiate between the canisters when using more than one dis-
pensing module, the hoses must be colour-coded using the colour la-
bels supplied.
Stick a label near the siphon and one of the same colour close to

the free end of the hose to enable clear identification.
The power supply connections are located on the back of the ma-
chine.
(They are described in detail in the operating instructions for your
cleaning machine.)
Connect the module to the machine's power supply.

DOS G 80/72 is supplied without a plug. It is designed for direct con-
nection to the PG 8172 tank dishwasher.

Maintenance

The dispensing system should be serviced at the same time as the
cleaning machine by Miele Service.
en - Connection
23