Product Description - Miele DOS G 80 Fitting Instructions Manual

The dispensing module is an external dispensing system that is inten-
ded solely for connection to Miele cleaning machines. It dispenses li-
quid process chemicals (detergent or rinsing agent, for example)
automatically at the appropriate stage of a programme. The dispens-
ing module does away with the need to fill the dispenser containers in
the door of the machine (if there are any). Up to two external dispens-
ing systems can be connected depending on the type of machine.
Suitable process chemicals are available from Miele Professional.
Dispensing modules can be retrofitted and connected if required.
This dispensing module is intended for stationary, indoor use only.
 Risk posed by conversions or modifications
Please note that the dispensing module must only be used for the
applications described in these instructions.
Any other use, conversion or modification is not permitted and po-
tentially dangerous.
Miele cannot be held liable for damage resulting from incorrect or
improper use or operation.
Initial commissioning will be undertaken by the Miele Customer
Service Department or authorised service technicians, who will
provide you with operating instructions.
Please follow the operating instructions for your cleaning machine
and pay particular attention to warning and safety instructions
when using and handling chemical agents.
 Damage caused by noncompliance with the fitting instructions.
Please read these fitting instructions carefully before fitting the dis-
pensing module.
This prevents both personal injury and damage to the dispensing
module.
Keep these fitting instructions in a safe place.
en - Product description
15