Table of Contents
Advertisement
Before returning the unit to place of purchase and before calling for service, please kindly check by yourself with the following chart.
Symptoms
Cause(s)
• The AC power cord is not connected to
No Power
the power supply or is not connected to
a power supply securely.
Sound
• The audio cables aren't connected
There is no sound or
securely.
the sound is
• The volume is set to the minimum level.
distorted.
• The sound is switched off.
• The unit is being interfered with static
The buttons on the
electricity etc.
unit doesn't work.
The remote
• There is no battery in the remote control.
control does not
• The batteries are out of charge.
function.
• The remote control isn't pointed to the
remote sensor.
• The remote control is out of its operating
area.
• The unit is shut down.
Troubleshooting
• Please check that the AC power cord is connected
securely.
• Connect the audio cables securely. Turn up the volume.
• Press [MUTE] on the remote control to switch on the sound.
• Press [PLAY/PAUSE].
• Switch off and unplug the unit. Then connect the plug to
the power supply and switch it on again.
• Install two AAA/1.5V batteries in it. Replace the batteries
with new ones.
• Make sure that the remote control is pointed to the
remote control sensor.
• Make sure the remote control is within the operating area.
• Switch off the unit and disconnect it from the AC outlet.
Then power on the unit again.
-12-
Remedy
Advertisement
Table of Contents
