Page 3
To ensure the specified EMC performance, operate this product only with shielded cables and accessories. Caution The protection provided by the PXI-2530B can be impaired if it is used in a manner not described in this document. Topology Refer to the NI Switches Help at ni.com/manuals...
PXI-2530B 1-wire octal 16 x 1 multiplexer 2-wire 64 x 1 multiplexer 2-wire dual 32 x 1 multiplexer 2-wire quad 16 x 1 multiplexer 4-wire 32 x 1 multiplexer 4-wire dual 16 x 1 multiplexer 1-wire 4 x 32 matrix...
Page 5
PXI-2530B Caution Do not connect the PXI-2530B to signals or use for measurements within Measurement Categories II, III, or IV. Note Measurement Categories CAT I and CAT O are equivalent. These test and measurement circuits are not intended for direct connection to the MAINS building installations of Measurement Categories CAT II, CAT III, or CAT IV.
For more information about adding protection circuitry to a capacitive load, visit ni.com/info and enter the Info Code relaylifetime. For information about inductive loads, enter the Info Code relayflyback. Note The relays used in the PXI-2530B are field replaceable. ni.com...
+2.0 V Nominal +3.3 V Maximum +5.5 V Note The PXI-2530B can recognize trigger pulse widths less than 150 ns if you disable digital filtering. Output trigger Destinations PXI trigger lines 0 to 7, front panel Pulse width Programmable (1 µs to 62 µs) Front panel nominal voltage +3.3 V TTL, 8 mA...
Physical Characteristics Relay type Reed Note NI advises against installing reed relay modules directly adjacent to an embedded controller with a magnetic hard drive because of the sensitivity of reed relays and the possibility of interference. Front panel connector LFH matrix 50, 160 positions, female PXI power requirement 4.2 W at 5 V, 1.2 W at 3.3 V...
PXI-2530B Shock and Vibration Operational Shock 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) Random Vibration Operating 5 Hz to 500 Hz, 0.3 g Nonoperating 5 Hz to 500 Hz, 2.4 g (Tested in accordance with IEC 60068-2-64.
Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column.
Page 11
NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment and to NI customers. For additional environmental information, refer to the Minimize Our Environmental Impact web page at ni.com/environment.
Need help?
Do you have a question about the PXI-2530B and is the answer not in the manual?
Questions and answers