7.4.
Troubleshooting Guide of the acceleration sensor
Length and width detection which were always detected by OIS by the lens side. This machine is performed by the body side.
The acceleration sensor (IC2701) for length and width detection is attached to main P.C.B..
(It is an acceleration sensor for detecting gravity.)
INSPECTION
1. Turn the rotation display on.
→[ PLAYBACK ](3/4)----[Rotate Disp.](ON, OFF)
2. A lens is attached.(The kind of lens to be used is not decided.)
3. A photograph is taken for length.
4. When the taken photograph is reproduced, if displayed for length by the LCD, a problem is not in a acceleration sensor.
36