Related Manuals for Pro-dig Intelli-Tork
Summary of Contents for Pro-dig Intelli-Tork
- Page 1 WIRELESS SCREW PIER TORQUE MONITORING SYSTEM Instruction Manual Manual number: PROITK Operating Instructions Owners Manual Maintenance Release Date: September 3, 2019 Safety Precautions Parts Lists 785.856.2661 WWW.PRO-DIG-USA.COM...
- Page 2 PRO-DIG LLC. Neither the whole, nor any part, may be disclosed, loaned, copied, or otherwise ® disseminated for any purpose whatsoever without express written consent from PRO-DIG LLC. ® No liability is accepted for any loss, damage or injury from any cause whatsoever from the use of this document.
- Page 3 This method of measuring the torque applied is highly accurate (+/- 0.3%). The torque sensor is built into the housing of the Intelli-Tork. The data is transmitted directly to a smart device that has the “Intelli-tork ”...
-
Page 4: Settings Page
3.0 SETTINGS PAGE All settings for your PRO-DIG Intelli-Tork are accessable from within the App. Simply select the settings icon ® © from the bottom right. On this page you can select preferences and make changes, as appropriate to your desired usage. -
Page 5: Connection Guide
® device, which corresponds to the serial number of your Intelli-Tork by accessing the list of wireless networks avail- © able in Settings. Please ensure that you are in close proximity to the PRO-DIG Intelli-Tork when you do this. ®... - Page 6 You can now close the settings page and open the PRO-DIG Intelli-Tork App which you will have ® © previously downloaded from the Apple App Store or Google Play Store. Data If the App is connected successfully to the PRO-DIG...
-
Page 7: General Operation
5.0 GENERAL OPERATION The App has five pages and navigation between pages is achieved by clicking on one of the four icons shown at the bottom of the screen, as below, MONITOR: this is the page Settings: Here you can on which we imagine you will change the Intellitork spend the most time. - Page 8 Nm selected for the units. The number of rotations are displayed and can be zeroed from the Moni- tor page. The serial number of your Intelli-Tork is displayed, as is the battery volt- ©...
- Page 9 The email will contain a .csv which will contain the log data and can be opened in Microsoft Excel or most © other spreadsheet software packages. WWW.PRO-DIG-USA.COM...
- Page 10 Should you try and change the WiFi channel while not connected to your PRO-DIG Intelli-Tork torque sensor then you will ® © receive an error, as below. Just press OK. You should not receive this error message when connected to your PRO-DIG Intelli- ® Tork © 785.856.2661...
- Page 11 6. After completing the text import wizard, your data will display in your Microsoft Excel spread- sheet. The displayed data can be manipulated and graphed to suit your individual preferences. WWW.PRO-DIG-USA.COM...
- Page 12 INSTALLING THE TORQUE HUB 1. The Intelli-Tork should be installed between the flange faces of the shaft adaptor and the pile drive tool. Please ensure that the fastening bolts are rated to at least grade 8, and torque the bolts to the appropriate manufacturer’s guide- lines.
- Page 13 WWW.PRO-DIG-USA.COM...
- Page 15 NOTES:...
- Page 16 PROUD MEMBER OF: 1604 ROSEPORT RD ELWOOD, KS 66024 785.856.2661 WWW.PRO-DIG-USA.COM...
Need help?
Do you have a question about the Intelli-Tork and is the answer not in the manual?
Questions and answers