Velleman GASIRON2 User Manual page 4

sun. WARNING! This tool must be placed on its stand when not
in use; do not leave the tool unattended when switched on.
3. General Guidelines
●
pages of this manual.
forbidden
modifications to the device is not covered by the warranty.
use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any
ensuing defects or problems.
dealers can be held responsible for any damage (extraordinary,
incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.
manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
5. Assembly
WARNING! Always let the GASIRON2 cool down before adding or
removing parts. WARNING! Keep a burning or hot GASIRON2
away from flammable materials and other people.
●
counterclockwise.
installed, make sure the locking ring is well fastened and the
exhaust vent faces up. If the exhaust vent faces down, it may
damage the surface underneath what you are soldering.
soldering tip itself can also be removed by screwing it off.
V. 03 – 29/11/2022
Refer to the Velleman
for safety
1 soldering tip
2 exhaust vent
3 ignition vent
4 locking ring
5 stand
The soldering head can be screwed off by turning the locking ring
GASIRON2
®
Service and Quality Warranty on the last
●
All modifications of the device are
reasons.
●
Nor Velleman Group nv nor its
●
When working with the soldering head
4
Damage caused
●
Damage caused by
6 on-off switch
7 gas volume control
8 gas tank
9 refill valve
10 nozzle
©Velleman Group nv
by user
●
Only
●
Keep this
●
The