Cooktop Communication Module Setup; Wi-Fi Commissioning - Cafe CHP90362TSS-Slate Owner's Manual

Cooktop Communication Module Setup (If Applicable)
Look at the underside of the cooktop in the front/left
corner to see if there is an input connector jack.
If the connector jack looks like this then no further action
is required, proceed to Wi-Fi Commissioning.

Wi-Fi Commissioning

Turning On the Wi-Fi
Download the SmartHQ App onto your mobile device and create an account. Use the + button on the SmartHQ App
homepage to add the cooktop, follow the steps in the SmartHQ App to connect Wi-Fi.
Press and hold the Precision Cooking button for 3 seconds until display reads "Add". Tap the
display reads "Off". Tap the
steps in the SmartHQ App. To exit Commissioning and Pairing, press Precision Cooking button one time, or menu
will automatically exit after 60 seconds of no user input.
Turning Off the Wi-Fi
Hold the Precision Cooking pad for 3 seconds until display reads "Add" and Bluetooth symbol is blinking. Tap
twice until the display reads "On" and the and the
when complete.
49-2000960 Rev. 0
to turn Wi-Fi On. The
is blinking. Tap
If the connector jack looks like this then refer to the
instruction insert included in the literature packet
titled "Important Installation Instruction Cooktop
Communication Module" for setting up this device.
will start blinking. The
to turn Wi-Fi Off. The
twice until the
will turn solid when complete
icon will turn off
9