Table of Contents
Advertisement
Quick Links
CAUTION
THIS ATV WAS SHIPPED
WITHOUT ENGINE OIL.
ALWAYS FILL WITH THE
CORRECT AMOUNT AND
GRADE OF ENGINE OIL
POWERSPORTS
AS LISTED IN THE
OWNER'S MANUAL
ASSEMBLY/PRE-RIDE
INSPECTION INSTRUCTIONS
AT110
FOR QUESTIONS ABOUT THESE ASSEMBLY INSTRUCTIONS,
CALL COLEMAN POWERSPORTS 888-405-8725
WARNING
WARNING
NEVER ATTEMPT TO START THIS ATV WITHOUT READING AND
UNDERSTANDING THE OWNER'S/ OPERATOR'S MANUAL. THE
OWNER'S OPERATOR'S MANUAL PROVIDES INFORMATION ON
SAFETY, PARTS, FUNCTIONS, PRE-RIDE INSPECTION,
STARTING AND MAINTENANCE
121020
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Coleman AT110
Summary of Contents for Coleman AT110
- Page 1 AS LISTED IN THE OWNER’S MANUAL ASSEMBLY/PRE-RIDE INSPECTION INSTRUCTIONS AT110 FOR QUESTIONS ABOUT THESE ASSEMBLY INSTRUCTIONS, CALL COLEMAN POWERSPORTS 888-405-8725 WARNING WARNING NEVER ATTEMPT TO START THIS ATV WITHOUT READING AND UNDERSTANDING THE OWNER’S/ OPERATOR’S MANUAL. THE OWNER’S OPERATOR’S MANUAL PROVIDES INFORMATION ON...
-
Page 2: Removal From Crate
AS LISTED IN THE OWNER’S MANUAL ASSEMBLY/PRE-RIDE INSPECTION INSTRUCTIONS FOR QUESTIONS ABOUT THESE ASSEMBLY INSTRUCTIONS, CALL COLEMAN POWERSPORTS 888-405-8725 WARNING WARNING NEVER ATTEMPT TO START THIS ATV WITHOUT READING AND UNDERSTANDING THE OWNER’S/ OPERATOR’S MANUAL. THE OWNER’S OPERATOR’S MANUAL PROVIDES INFORMATION ON... -
Page 3: Handlebar Assembly
HANDLEBAR ASSEMBLY PARTS Handlebar Clamp Brackets (4) M8 x 45 Bolts HANDLEBARS STEP 1 Attach bottom clamp brackets to steering assembly bracket using M8 x 45 Bolts (4) - Page 4 GEAR INDICATOR ASSEMBLY STEP 1 Insert the gear indicator on the handlebars. GEAR INDICATOR COVER...
-
Page 5: Rear Wheel Assembly
REAR WHEEL ASSEMBLY PARTS M16 Castle Nuts M16 Washers Tires Cotter Pins Hub Caps NOTE FILL TIRES WITH 10 PSI OF AIR BEFORE ASSEMBLY STEP 1 Attach wheel in the following order: 1.)......Wheel 2.)....M16 Washer 3.).....M16 Caslte Nut 4.).....Cotter Pin STEP 2 Install Hub Caps on each wheel NOTE... -
Page 6: Front Wheel Assembly
FRONT WHEEL ASSEMBLY PARTS M14 Washers M14 Castle Nuts Tires Cotter Pins Hub Caps NOTE FILL TIRES WITH 10 PSI OF AIR BEFORE ASSEMBLY STEP 1 Attach wheel in the following order: 1.)......Wheel 2.)....M14 Washer 3.).....M14 Caslte Nut 4.).....Cotter Pin STEP 2 Install Hub Caps on each wheel NOTE... -
Page 7: Front Bumper Assembly
FRONT BUMPER ASSEMBLY M8 x 20 Bolts (2) M8 x 12 Bolt Bumper STEP 1 Install front bumper with M8 x 20 bolts and M8 x 12 bolt. M8 x 20 Bolts M8 x 12 Bolt... -
Page 8: Battery Assembly
BATTERY ASSEMBLY COMPONENTS Battery Battery Straps STEP 2 STEP 1 Attach the red wire to the POS + Install batter in battery bracket side of the battery with the located underneath the seat of the ATV. provided screws. Attach the black wire to the NEG - side of the battery with the provided screws. -
Page 9: Pre-Ride Inspection
PRE-RIDE INSPECTION Inspecting and checking the WHAT TO CHECK FOR condition of the ATV before each CHECK ride is important. Following the • Smoothness Steering pre-ride check list will help ensure • No restriction of that you do not have mechanical movement problems which could result in Brakes... - Page 11 WARNING NEVER ATTEMPT TO START THIS ATV WITHOUT READING AND UNDERSTANDING THE OWNER’S/ OPERATOR’S MANUAL. THE OWNER’S/ OPERATOR’S MANUAL PROVIDES INFORMATION ON SAFETY, PARTS, FUNCTIONS, PRE-RIDE INSPECTION, STARTING AND MAINTENANCE POWERSPORTS (888) 405-8725 1775 E. University Dr., Tempe, AZ 85281 www.colemanpowersportsusa.com www.facebook.com/colemanpowersportusa.com www.instagram.com/colemanpowersports_usa...
Need help?
Do you have a question about the AT110 and is the answer not in the manual?
Questions and answers