1.0 Introduction The Premier Elite ComPort+ plugs into the onboard digi connector on Premier Elite 12/24/48/64/88 & 168 control panels allowing use of Com Port 3. Premier Elite 640 already has Com port 3. V3 firmware is required to enable the device, which when used allows connection of any device listed in the Com 3 dropdown menu, or connection to a local PC via a USBCom for upload/download capability.
3.0 Premier Elite ComPort + Installation To install the Premier Elite ComPort+ proceed as follows: Ensure that all power is removed from the control panel before connecting the Premier Elite ComPort+. Plug the Premier Elite ComPort+ onto the 10 way onboard digi pins on the control panel.
4.0 Programming the Control Panel The control panel will then need to be programmed correctly in order for the Premier Elite ComPort+ to function as expected: Programme Premier Elite ComPort+ ???? Enter the engineer code Press then (UDL/Digi Options). Press then or (Com Port Setup/Onboard Digicom).
Grade 2 and Environmental Class II. 5.0 Warranty All Texecom products are designed for reliable, trouble-free operation. Quality is carefully monitored by extensive computerised testing. As a result the Premier Elite ComPort+ is covered by a two-year warranty against defects in material or workmanship.
Need help?
Do you have a question about the Premier Elite ComPort+ and is the answer not in the manual?
Questions and answers