Makita PW5001C Instruction Manual page 9

3
B
2
A
1
1. Lever
2. Open
3. Close
ASSEMBLY
1
2
1. Head cover
2. Side grip
3. Screw
Opening or closing of water lever
004732
To keep the lever on the tool for water flow open, turn it to the
position A where the water passage will be ready. Return it to
the position B to close.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip (handle)
006099
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Screw the side grip securely on the position of the tool as
005588
shown in the figure.
Remove one of the screws which secure gear housing and
head cover then screw the side grip on the tool.
3
9