Summary of Contents for Network Technologies Incorporated VOPEX Series
Page 1
® VOPEX Series VOPEX-C64K18GB-4HDBT 4K 18Gbps HDMI HDBaseT Splitter/Extender via CAT6/6a/7: 4-Port Installation and Operation Manual VOPEX-C64K18GB-4HDBT Local Unit (Back) and Four Remote Units (Included) MAN415 Rev Date 10/13/2022...
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port INTRODUCTION The VOPEX® 4K 18 Gbps HDMI HDBaseT Splitter/Extender simultaneously distributes uncompressed Ultra-HD 4Kx2K@60Hz 4:4:4 HDMI video, multi-channel audio, RS232, and IR from one video source to up to four displays and speakers, each located up to 394 feet away via CAT6/6a/7 cable using HDBaseT technology.
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port WHAT IS INCLUDED Materials supplied with this kit 1x 4-port HDbaseT splitter 4x HDBaseT receivers 5x IR emitters 5x IR receivers 5x 3-pin Phoenix connectors for RS232 1x 5-pin Phoenix connector for audio 1x 100 - 240VAC@50/60Hz;...
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port FEATURES AND FUNCTIONS Transmitter (Front View) LABEL CONNECTOR/LED DESCRIPTION When the device is powered on, the red power LED will POWER (SYMBOL) be illuminated. When the HDMI IN port connects an active source device, the green LED will be illuminated.
Page 7
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port Transmitter (Rear View) LABEL CONNECTOR/LED DESCRIPTION 3-Terminal Block Connect screw terminals to a PC or control system via a 3-terminal RS232 block for three functions: 1- Firmware update; 2- Control the Splitter via RS-232 commands; 3- RS-232 signal pass-through (from transmitter to receiver or from receiver to transmitter).
Page 8
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port Receiver (Front and Rear View) LABEL CONNECTOR/LED DESCRIPTION Illuminates ON when power is ON POWER (SYMBOL) USB Micro Type B Used for firmware update (none available at this time) SERVICE Power Jack The HDBaseT receiver is powered by the transmitter via a CAT6/6a/7 DC24V...
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port Cascaded VOPEXs For an application where more displays need to be viewed, the VOPEX can be cascaded for connection to more Receivers with zero latency.
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port EDID MODES The EDID Modes are determined by the DIP Switch settings and are defined in the chart below.
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port ASCII COMMANDS The VOPEX also supports ASCII command control. Connect the RS232 port to a computer with a 3-wire cable. Then open a serial program (i.e. HyperTerminal) on the computer to send ASCII commands to control the VOPEX. A list of ASCII commands are below.
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port TECHNICAL SPECIFICATIONS Local Unit Compatible with computers and UHD video sources (satellite receivers, Blu-Ray players, etc) with HDMI video. One female HDMI connector for video source. One female HDMI connector for local display or for cascading to another VOPEX-C64K18GB- 4HDBT.
NTI 4K 18Gbps HDMI HDBaseT Splitter Extender via CAT6/6A/7: 4-Port Regulatory Approvals CE, FCC, RoHS Maximum Distance 394 feet (120 meters) for Ultra-HD 4Kx2K 60Hz 4:4:4 over CAT6/6a/7 cable. 443 feet (135 meters) for 1080p and 1920x1200 over CAT6/6a/7 cable. WARRANTY INFORMATION The warranty period on this product (parts and labor) is two (2) years from the date of purchase.