Page 2
Features • Incorporates HDBaseT technology •Distribute 1Ultra HD HDMI signal to 4 identical HDBaseT outputs, with 1x loop HDMI output •Transmitter Distance up to 100m under 1080p, 70m under 4K •HDCP 2.2/1.4 compliant •Support resolution to 4K@60Hz, YUV 4:2:0, VESA resolution up to 1920x1200 •Support Dolby TrueHD, DTS-HD Master Audio •With wide-band Bi-Directional IR control (38 ~ 56 kHz) (IR extension from Sender to Receiver or from Receiver to Sender)
Page 3
TABLE OF CONTENTS Package Contents Dimensional drawing Panel Descriptions Connecting and Operating Applications Packing contents 1) Main Unit: 1x4 HDBaseT Splitter 2) 2x Power supply DC 12V 3) 4x IR-TX cable 4) 4x IR-RX cable 5) 1x Phoenix plugs for RS232 cable termination 6) 4x screws 7) 2x detachable mounting ears 8) Operating Instruction manual...
Page 5
Front Panel Power ON/OFF Indicator of Loop out Indicator of out DIP switch for EDID setting Reset button Indicator of Power RS232 port Rear Panel Ethernet port Output1 port (Ethernet, RS232 pass-though) Output2,3&4 port HDMI Input port HDMI Output port POC port Main power EDID...
Page 6
4) Connect 4pcs IR TX cables to the IR-TX sockets on the splitter and connect 4pcs IR RX cables to the IR-RX sockets on the splitter. 5) Connect IR RX cable to IR-In port of Receiver, connect IR TX cable in to IR-Out port of Receiver. 6) Power up all units, the splitter,Receiver, sources and displays.
Page 7
Application drawing showing connections using the Ethernet support option:...