Stand alone setting menu for intelligent digital lock (7 pages)
Summary of Contents for SEVENOC M7
Page 1
1) The factory administrator initial passcode is 123456, under the initial state any Passcode or SEVENOC RFID Card can open the lock. 2) Once the new administrator Passcode or SEVENOC RFID Card has been set, any Passcode and unknown RFID card cannot open the lock.
Page 2
3. Modify Administrator Passcode Input “ *12 “ and press confirmation key, “ # “ Initiate State (enter *12#) Input new Input 123456 and administrator Passcode press “ # “ and press “#” (enter 123456#) (enter 456789#) Enter again new administrator Passcode and press “...
Page 3
4. Add User (Passcode, SEVENOC RFID Card) Settings a) Add Passcode Input “ *85 “ and Input administrator Passcode and press “ # “ press confirmation key, “ # “ (enter *85#) (enter 456789# ) (enter *12#) Enter again Passcode Input Passcode and press “...
Page 4
5. Delete All User (Passcode, SEVENOC RFID Card) Settings a) Delete All User Passcode Information Input “ *71 “ and press Input administrator Passcode and Confirmation key, “ # “ press confirmation key, “ # “ (enter *71#) (enter 456789# )
Page 5
6. Other Notes 1) Input the wrong passcode more than 5 times in a row, the keyboard lock for 30 seconds, it does not respond to any operating system in 30 seconds. 2) Passcode peeping prevention function : input passcode as follows when opening the door with passcode : XXX passcode XXX;...
Need help?
Do you have a question about the M7 and is the answer not in the manual?
Questions and answers