Canon G640 Getting Started page 7

6
Extend the paper output tray.
7
Follow the on-screen instructions, and then
press the OK button.
•
Please wait momentarily until the following screen
appears.
Select the connection method that best matches how you
will use the printer.
•
To use the printer without connecting to any other
devices
Setup is now complete.
•
To use the printer connecting to a computer or
smartphone
Proceed to the next page.
If an error message (support code) appears on
the screen
Check the support code, and then follow the
instructions if the displayed code is written below.
•
1890
Protective material remaining.
"2. Removing Packing Materials" on page 1
•
1470/1471
Print heads are not installed correctly.
"3. Installing the Print Heads" on page 1
•
1474
Print heads are not installed correctly.
Close the ink valve lever, and swap the left and right print
heads.
b
"3. Installing the Print Heads" on page 1
•
5200
Ink system preparation was not completed successfully.
Press the ON button to restart the printer, and then see "5.
Pouring Ink" on page 3.
For all other cases, refer to the Online Manual.
Support code
a
c
5