Entering The Service Tag In The Bios - Dell XPS L401X Service Manual

Hide thumbs Also See for XPS L401X:
Table of Contents

Advertisement

 
2. Align the connectors on the system board with the slots on the top cover and place it on the top cover.
 
3. Replace the two screws that secure the system board to the top cover.
 
4. Connect the Bluetooth-card cable, logo-light cable, and daughter-board cable to their connectors on the system board.
 
5. Replace the AC-adapter connector (see
 
6. Replace the processor module (see
 
7. Replace the processor fan and heat-sink assembly (see
 
8. Follow the instructions from
 
9. Connect the Bluetooth-card cable, logo-light cable, and daughter-board cable to their connectors on the system board.
 
10. Replace the display assembly (see
 
11. Replace the keyboard (see
 
12. Replace the palm-rest assembly (see
 
13. Follow the instructions from
 
14. Replace the hard drive (see
 
15. Replace the Mini-Card(s) (see
 
16. Replace the memory module(s) (see
 
17. Replace the battery (see
 
18. Replace any blank or card you removed from the Media Card Reader slot.
 
CAUTION:
result in damage to the computer.
 
19. Turn on the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
 
20. Enter the service tag (see
 Entering the Service Tag in the BIOS
 
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
 
2. Turn on the computer.
 
3. Press <F2> during POST to enter the system setup program.
 
4. Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
 
Great user manuals database on
Replacing the AC-Adapter
Replacing the Processor
step 9
to
step 11
in
Replacing the Top
Replacing the Display
Replacing the
Keyboard).
Replacing the Palm-Rest
step 5
to
step 6
in
Replacing the Optical
Replacing the Hard
Drive).
Replacing the
Mini-Card(s)).
Replacing the Memory
Replacing the
Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
Entering the Service Tag in the
UserManuals.info
Connector).
Module).
Replacing the Processor Fan and Heat-Sink
Cover.
Assembly).
Assembly).
Drive.
Module(s)).
BIOS).
Assembly).

Advertisement

Table of Contents
loading

This manual is also suitable for:

P12g

Table of Contents