Table of Contents
Advertisement
• Use only water or a neutral cleaning agent to clean.
• Never use caustic or abrasive agents (i.e. vinegar or limescale removers), as they may damage the appliance.
• Do not use water over 40ºC in temperature.
• Keep the device away from high temperatures and avoid direct sunlight.
Main unit
1. Remove the water tank and drain the remaining water inside the device.
2. Clean by using a damp cloth with liquid soap and dry with a soft dry cloth.
3. Do not submerge the main unit in water to clean.
Handle
1. Wash with water and dry with a soft cloth.
2. Do not bend, pull or twist the water hose.
Water tank
1. Wash with water and wipe with a soft, dry cloth.
2. Make sure the water tank is firmly fixed in position before storing.
Nozzle
1. Wash with water and wipe with a soft dry cloth.
2. Place the nozzle in the storage compartment.
3. Replace the standard nozzle and tongue cleanser once every six months, and the other tips once every three months.
Charging adaptor
Wipe the metal part of the power plug with a dry cloth once every six months.
Problem
Unit does not work
Water pressure is very low
Water does not come out
Tank leaks
Tear in pocket tip head
MAINTENANCE
TROUBLESHOOTING
Possible Cause
Motor not running
Dirt stuck in the nozzle
The nozzle is deformed
Dirt stuck in the tank valve
The tank is empty
Pause switch on
Tank valve is not open
The valve is missing
The valve isn't installed correctly
Tip head is worn
Make sure the adapter is firmly connected
to the outlet and plugged in
Make sure the outlet and unit power is on
Clean or replace with a new nozzle
Replace with a new nozzle
Clean the valve and fill the tank with pure
water
Fill the tank up
Ensure Pause switch is fully in the 'I' position
Press down on the tank and ensure it is
correctly fitted
Replace with a new tank valve
Take off the valve and reinstall again
Replace with a new nozzle
9
Solution
Advertisement
Table of Contents
