STEP 1
Take off the water tank and dispose of any unused water.
STEP 2
Slide the Pause Switch to the 'I' position, point the nozzle in to the sink and power on to drain the water
inside the unit, then slide the Pause Switch to the 'O' position again. Turn off the unit and unplug the
adapter.
STEP 3
Press down the Release Button, and remove the nozzle, then place it into the nozzle
case.
• To clean the nozzle, remove from the handle head by pushing the nozzle release
• Make sure the nozzle case and nozzle are firmly installed before switching the unit
STEP 4
Use a damp clean cloth to clean the unit.
button. Rinse under a tap and dry thoroughly.
back on.
AFTER USE
7