Crown EXO-20 Manual page 6

This product has been produced in accordance with safety rules and directives inforce.
NOTE: The values stated in the markings on the product or in other printed
documents provided with the products are the values obtained in the laboratory
environment in respect of the relevant standards. These values may change according
to the use and ambient conditions of the product
1
5
9
1-Body
2-Side Covers
3-Side Profile
4-Glass Tube Resistance
5-Reflector
6-Thermostat Adjustment Button
7-Rear Wall Fixing Parts
8-Cordon Cable
9-Iron Grill
Device installation:
•Mounting parts are provided in the package along with the product.
• Fix 4 dowels and screws on the wall at appropriate distances according to L
dimension demonstrated in the Figure 2.
• There are 2 wall fixing clips mounted on the back of the device, these clips should be
fixed on the product with plastic thumb screws at the same distance as the wall
mounting distance. There are 2 mounting apparatus in the package with the product,
as well. They should be attached to the clips with bolts and nuts, then the product is
placed in a suitable place to be hung on the wall, and the wall mounting process is
completed.
• The device should be completely parallel to the ground. For electric connection
which is required for wall mounting (in case of use without the cordon cable), get help
from the authorized service personnel.
7
4
3
2
Increasing position
Maximum
position
6
8
6
Temperature
Adjustment Button
Decreasing
Position
Fig. 1