Kia Telluride 2023 Manual page 217

Hide thumbs Also See for Telluride 2023:
Table of Contents

Advertisement

Features of your vehicle
OON042407
The ADS operates when the heater or air
conditioning is on.
The indicator illuminates when the ADS
senses the moisture on the inside of the
windshield and operates.
The ADS addresses excess moisture on
the inside of the windshield in stages.
For example if auto defogging does not
defog inside the windshield at step 1, it
tries to defog again at step 2.
1. Outside air position
2. Operating the air conditioning
3. Increasing air flow toward the wind-
shield
4. Blowing air flow toward the wind-
shield
Turning the ADS on or off
僅 Press the front windshield defroster
button for 3 seconds when the
ENGINE START/STOP button is in the
ON position.
When the ADS system is canceled, the
defroster button indicator will blink 3
times per 0.5 sec.
僅 To reset the ADS system to ON, hold
the front windshield defrost for 0.25
sec and the "ADS OFF" will be
removed from the climate control
screen.
Windshield defrosting and defogging
CAUTION
Do not remove the sensor cover located
on the upper end of the passenger side
windshield glass. Damage to the system
parts could occur and may not be cov-
ered by your vehicle warranty.
4
4
135

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents