Advertisement
2.5-inch Hard Drive: How to Install the Hard Drive
C
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
2. Attach the HDD cage to the bottom panel
1. Remove the four screws on the bottom case.
and secure it with screws.
en li up and remove the bottom panel.
SATA Data and Power Cable to the HDD.
4.
en reinstall the bottom panel.
*For iBOX 6000 Series, it is not recommended to install 2.5" HDD. If you install the 2.5" HDD, please keep the
iBOX 6000 Series in a vertical position to ensure better cooling performance.
SO-DIMM Slots: How to Install the Memory Modules
D
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory modules
2. Push down until the modules snap into place.
into the slot at a 30-degree angle.
How to Install the Wall Mounting Brackets
如何安裝掛牆式支架/
1. Remove four rubber foots on the base of
2. Attach the wall mounting brackets to
the iBOX 6000 Series.
the base of the iBOX 6000 Series and
secure them with screws.
3. Connect the SATA Cable to the connector on the
en connect the
motherboard.
(DDR4 Low Voltage (1.2V))
Note:
-
e iBOX 6000 Series requires DDR4
SO-DIMM (1.2V).
- For dual channel con guration, you always need to
install identical (the same brand, speed, size and
chip-type) DDR4 SO-DIMM pairs.
Dimension of the iBOX 6000 Series
with Wall Mounting Brackets Installed
165mm
151mm
How to Install the VESA Bracket (Optional)
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
/
1. Attach the two screws to the base of the
iBOX 6000 Series.
Note:
VESA bracket is not provided by default.
Please purchase it seperately if needed.
How to Install the Din Rail Mounting Bracket (Optional)
如何安裝軌道式支架/
1. Attach the Din Rail Bracket to the base of the
iBOX 6000 Series and secure it with screws.
Positions of the iBOX 6000 Series
iBOX C 系列擺放 / Positionen der iBOX 6000 Series / Positions de la série iBOX 6000 Series / Posizioni della iBOX 6000 Series / Posiciones de la iBOX 6000 Series /
iBOX 6000 Series / Posições de iBOX 6000 Series / iBOX 6000 Series 시리즈의 위치 / iBOX 6000 Seriesシリーズの位置
e iBOX 6000 Series can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
*Please note that keeping the iBOX 6000 Series in a vertical position will ensure better cooling performance.
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
80mm
106mm
2. Attach the VESA Bracket to the rear of
3. Mount the iBOX 6000 Series by sliding it
a compatible display using the four screws.
into place.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
Note:
Din Rail Bracket is not provided by default.
Please purchase it seperately if needed.
Note:
VESA bracket is not provided by default.
VESA-mounted
Please purchase it seperately if needed.
Advertisement
