elsner elektronik KNX B4 Universal Installation And Adjustment
  1. Manuals
  2. Brands
  3. elsner elektronik Manuals
  4. Recording Equipment
  5. KNX B4 Universal
  6. Installation and adjustment

elsner elektronik KNX B4 Universal Installation And Adjustment

Hide thumbs Also See for KNX B4 Universal:
Table of Contents

Advertisement

Quick Links

Download this manual
EN
KNX B4 Universal
Interface
Item number 70251
Installation and Adjustment

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KNX B4 Universal and is the answer not in the manual?

Questions and answers

Related Manuals for elsner elektronik KNX B4 Universal

Summary of Contents for elsner elektronik KNX B4 Universal

  • Page 1 KNX B4 Universal Interface Item number 70251 Installation and Adjustment...

  • Page 3: Table Of Contents

    6.3. Channels A/B, C/D ....................18 6.3.1. Two-button dimming .................. 18 6.3.2. Two-button shutter ..................19 Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany KNX B4 Universal Interface • from application 1.0 Version: 13.09.2021 • Subject to technical changes. Errors excepted.
  • Page 4 Clarification of signs This manual is amended periodically and will be brought into line with new software releases. The change status (software version and date) can be found in the contents footer. If you have a device with a later software version, please check www.elsner-elektronik.de in the menu area "Service"...

  • Page 5: Safety And Usage Instructions

    Due to its small housing with a diagonal of 50 mm, KNX B4 Universal finds enough room in a flush-mounted box (Ø 60 mm x 40 mm) behind the switch. The connecting cable pairs of 28 cm can be extended up to 10 m when twisted.

  • Page 6: Commissioning

    ETS. A button and a control LED are located on the unit for this purpose. Operation In network installations, KNX B4 Universal can be used as KNX binary input for po- tential-free contacts. After connecting to KNX TP, KNX B4 Universal operates with its default settings.

  • Page 7: Binary Input Application

    The Individual Address can be assigned to the device by setting the desired address in the properties window of the ETS. After starting the ETS download and then pressing the Programming Button the device restarts itself. KNX B4 Universal Interface • Version: 13.09.2021 • Technical changes and errors excepted.
  • Page 8 Operation Fig. 1: ETS Properties Window KNX B4 Universal Interface • Version: 13.09.2021 • Technical changes and errors excepted.

  • Page 9: Transfer Protocol

    (one-button shutter). down Dimming Input A/B This object is used to dim 1 byte DPT3 CR-T- brighter or darker (two- button dimming). KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
  • Page 10 Duration Input B This object is used to reset 1 bit DPT1 CR-T- the counter on receiving a telegram with "0" or "1". KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
  • Page 11 1. Dimming Input C/D This object is used to switch 1 bit DPT1 CR-T- on/off on/off a dimmable light source (two-button dimming). KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
  • Page 12 Blinds Input C This object is used to stop 1 bit DPT1 CR-T- open/ movement and adjust the close blinds (one-button shutter). KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
  • Page 13 This object is used to send a 2 bit, DPT2, CR-TU value predefined value on a long 1 byte, DPT5, long button press. 2 bytes DPT7, DPT9 KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
  • Page 14 Interlock Input D This object is used to lock/ 1 bit DPT1 C-WTU unlock functioning on receiving the value 1. KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.

  • Page 15: Ets Database Parameters

    Defines the contact type at the input, NO or NC. If NO is selected, the input is logic high after the contact is closed. Value rising edge off • on KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.

  • Page 16: Scene

    Defines the contact type at the input, NO or NC. If NO is selected, the input is logic high after the contact is closed. KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.

  • Page 17: Counter

    8-bit: 1…255; 50 16-bit: 1…65535; 200 32-bit: 1…2147483647; 500 Object is sent when the sending difference is reached. Write value via KNX disabled • enabled KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.

  • Page 18: Send Value

    2-bit: • ON, activate forced operation • OFF, activate forced operation • deactivate forced operation 8-bit: 0…65535 16-bit: 0…65535 Sets value; available for "on both edges". KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.

  • Page 19: One-Button Dimming

    Interlock disabled • enabled If Interlock is active, changes at the Input are not considered until the Interlock is deacti- vated again. KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.

  • Page 20: One-Button Shutter

    Time the input needs to be logical high to start the long operation. If the input is logical high for a shorter time, only the command for short operation will be sent. KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.

  • Page 21: Two-Button Shutter

    • enabled If Interlock is active, changes at the Input are not considered until the Interlock is deacti- vated again. Channel C/D accordingly. KNX B4 Universal Interface • Version: 13.09.2021 • from application 1.0 • Technical changes and errors excepted.
  • Page 22 Elsner Elektronik GmbH Control and Automation Engineering Sohlengrund 16 75395 Ostelsheim Phone +49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de Germany +49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de Technical support: +49 (0) 70 33 / 30 945-250...

This manual is also suitable for:

70251

Table of Contents