Care And Cleaning - GE PROFILE P8MSASS6TBB Owner's Manual

Care and Cleaning

WARNING
Unplug the appliance before cleaning.
Refer to the table below before cleaning the parts with water, a damp
cloth, or using any parts in the dishwasher.
DO NOT soak accessories in acidic liquid.
Failure to do so can result in death, fire, electrical shock or personal
injury
1. Clean the main unit with a damp cloth.
2. Clean the other parts in hot water either in the sink or dishwasher after
referring to the table.
3. Store the appliance in a dry place after cleaning.
Part
Stand Mixer Body
Bowl / Bowl Lid
Whisk
Beater
Dough Hook
Attachment Output Shaft Cleaning Tips:
1. Wipe down the attachment output shaft after
each use to remove excess flour.
2. For dry ingredients, use a warm, damp, cloth to gently wipe down
the exterior and remove any dust that might remain.
3. For wet ingredients, use a warm, damp, soapy cloth to gently
wipe down the exterior and any dough that might remain.
4. To ensure the full range of motion is cleaned; gently pump the attachment
output shaft up and down with the damp cloth.
5. Use a cleaning brush to remove any dough that may have blocked the
attachment output shaft.
NOTE: Attachment must be inserted into the output shaft for full range of motion.
16
Sink




Dishwasher Damp Cloth




Attachment
output shaft





49-9000044 Rev. 0