Using Your Stand Mixer - GE PROFILE P8MSASS6TBB Owner's Manual

Using your Stand Mixer

Appearance may vary slightly
1
Make sure the mixer is unplugged and turned off.
2
Lower the bowl lift arms by pressing down on the lift arms.
3
Place the bowl into the bowl arms and align on pins. Push the bowl back towards the mixer
body until it clicks into place.
4
Insert your desired attachment. Push attachment into the output shaft until a click is heard
and the attachment is held firmly in place. See the speed chart on page 9 for a guide on
attachment use.
Push upward
49-9000044 Rev. 0
Ready
Ready
11