Clock Adjustment; Setting The Timer; Radio Operation - Coby CXCD470 Instruction Manual

CLOCK ADJUSTMENT

1. Set to "TAPE" [13] or "AUX" [28] mode. The clock will appear on the LCD display
2. Press the MEMORY/C-ADJ. Button [31] once to adjust the hour. Press the button once
more to adjust the minute.
3. Press the /TUNING
- Press the
When keep pressing the button, the "hour" or "minutes" setting is increased continuously
until the button is released.
- Press the
setting. When keep pressing the button, the "hour" or "minutes" setting is decreased
continuously until the button is released.
4. Press the MEMORY/C-ADJ. Button again to confirm the time setting.
5. If the unit is in the "RADIO" or "CD" mode, press the MODE/REMAIN Button [10] and
repeat step 2-4.

SETTING THE TIMER

You can set the automatic switch-on and switch-off time using the timer function. For this
purpose, set the correct time first.
1. The "MODE/REMAIN" Button [10] should be press twice. TIMER ON appears on the dis-
play unit to set the switch-on time.
2. After pressing the "MEMORY/C-ADJ." Button [31], the hours can be set using the
TUNING Button [35] and
3. To set the minutes, press the "MEMORY/C-ADJ." Button [31], use the
Button [35] and
4. When the "MODE/REMAIN" Button [10] is pressed again, TIMER OFF appears on the
display unit to set the switch-off time.
5. As described above, set the switch-off time.
6. Press the "TIMER" Button [8] to switch on the timer.
7. Press the "TIMER" Button [8] again, until the message TIMER disappears from the display
unit to switch off the timer.
* TIMER OFF can only be function when the unit is switch on by TIMER ON function.

RADIO OPERATION

1. Press the POWER Button [5] once to turn the unit on. The STAND-BY indicator [6] will
turn on.
2. Press the TUNER/BAND Button [29] to "RADIO" mode.
3. Press the TUNER/BAND Button [29] to the desired band.
4. Press the /TUNING
5 sec.) to step up or down the receiving frequency in order to select the desired station.
5. For auto tuning, keep pressing the
than 0.5 sec.) until the displayed frequency starts to change, then release the button. Tun-
ing will stop automatically when a station is received.
6. To turn the unit off after use, simply press the POWER Button once again and the STAND-
BY indicator will light off.
Button [35] and
/TUNING Button once to add one hour or one minute to the time setting.
/TUNING Button once to reduce one hour or one minute to the time
/TUNING
/TUNING Button [35].
Button or
/TUNING
Button [35].
/TUNING Button [35]; momentarily (less than 0.
/TUNING Button or
6
Button [35] to set the time.
/ TUNING
/TUNING Button (more
/