Summary of Contents for Coby CXCD470
- Page 1 CXCD470 MINI SYSTEM WITH 3-CD CHANGERS AND DOUBLE CASSETTE RECORDER INSTRUCTION MANUAL...
- Page 2 WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. IMPORTANT Since the CD circuity may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner. The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended to alert...
-
Page 3: Location Of Controls
LOCATION OF CONTROLS 1. LCD Display 2. Selector Disc (Disc 3) Button 3. Selector Disc (Disc 2) Button 4. Selector Disc (Disc 1) Button 5. Power ON/OFF Button 6. Stand By Indicator 7. Remote Sensor 8. Timer Knob 9. Mute Knob 10. - Page 4 45. AUX In 46. Beat Cut Switch 47. Right Speaker Out Let 48. Left Speaker Out Let 49. Left Surround Speaker Out Let 50. Right Surround Speaker Out Let 51. FM Antenna 52. AC Voltage Selector (for dual voltage version only.) 53.
- Page 5 OPERATIONS 1. Carefully unpack the unit and speakers. Remove all packing material from around the unit. 2. Locate the unit horizontally on a heavy duty stand or firm level surface and away from the speaker system to avoid acoustic feedback. CONNECTIONS 1.
-
Page 6: Clock Adjustment
CLOCK ADJUSTMENT 1. Set to “TAPE” [13] or “AUX” [28] mode. The clock will appear on the LCD display 2. Press the MEMORY/C-ADJ. Button [31] once to adjust the hour. Press the button once more to adjust the minute. 3. Press the /TUNING - Press the /TUNING... - Page 7 FM RECEPTION Raise and extend the FM antenna wire [51] then adjust the position for the best reception. ST indicator will appear on the display only if an actual stereo broadcast station is being received. AM RECEPTION Rotate horizontally or relocated the unit for best reception as the built-in ferrite bar antenna is directional.
-
Page 8: Compact Disc Operation
COMPACT DISC OPERATION CONCERNING COMPACT DISC 1. USABLE COMPACT DISCS Use a compact disc bearing the mark as shown. 2. Notes on handling discs Removing the disc from its storage case and loading it. Press the claws at the center of the case Lift out without touching the recorded surface •... - Page 9 PLAYING CD 1. Push the POWER Button [5] to turn the unit on. The STANDBY INDICATOR [6] will light up. 2. Press the CD Button [14] to “CD” mode. 3. Press the OPEN/CLOSE Button [38] once to open the disc tray [42] and place CDs (label side facing up) on the disc tray, press DISC SKIP Button [39], the carousel rotates, so you can insert another CD.
-
Page 10: Maintenance
3. Press the FORWARD SKIP or BACKWARD SKIP Button [35] to select the desired track. 4. Press the MEMORY/C-ADJ. Button [31] again to ENTER the selection into the program memory. 5. Repeat steps 2, 3 and 4 to enter desired tracks up to maximum of 20 selections. 6. -
Page 11: Tape Operation
TAPE OPERATION GENERAL INFORMATION ON CASSETTE TAPES • For playback, use normal (low-noise) tape for best sound. (Metal or chrome tape is not recommended) • For recording, use normal tape only. • Do not use C-120 tapes, tapes with internal reels or poor-quality tapes because they can cause malfunctions. - Page 12 3. Insert a cassette tape into the cassette compartment. 4. Press the RECORD Button [16], the CD player will begin recording from first track or the first of the programmed track automatically. Otherwise, you can select a desired track by...
-
Page 13: Operation Of Remote Control Unit
OPERATION OF REMOTE CONTROL UNIT LOADING BATTERIES 1. Remove the battery compartment cover. 2. Insert 2 “AAA” size (not included) batteries as indicated by the polarity marking. (Placing the batteries in the wrong way around cause malfunction.) 3. Close the battery compartment cover. OPERATION PROCEDURE Plug the power cord of the system into an AC wall outlet, and press the POWER ON/STAND BY button on the remote control unit to turn the power on. - Page 14 - MODE/REMAIN Button • In radio operation Press the button to change from frequency display to clock display and press again to return. • In CD operation Press the button to change the display from playing time to remaining time, and then to clock display.
-
Page 15: Specification
SPECIFICATION RADIO SECTION Frequency CASSETTE SECTION Track System Recording System Tape Frequency Response CD SECTION Sampling Frequency Frequency Response GENERAL Output terminal Output Power Weight POWER SOURCES Mains Operation Power Consumption Dimension Main Unit Speaker Surround Sound Speaker FM: 87.5 — 108 MHz AM: 522 —... -
Page 16: 90-Day Limited Warranty
90 DAY LIMITED WARRANTY COBY ELECTRONICS CORP. ("COBY") warrants this product to the original purchaser to be free from defects in material or workmanship under normal use of 90 DAYS from the date of original purchase. COBY agrees under this warranty, to repair or replace it with a new or reconditioned product at no additional charge.