Creative SondBlaster X5 Quick Start Manual page 2

CONTENTS:
OVERVIEW
1. Power Button (w/ LED)
- Press to power ON / OFF
2. Bluetooth Button (w/ LED)
- Long Press 2 sec to go into pairing mode
- Press once to reconnect to last connected Bluetooth device
- Press 5 Secs to reset
3. Display Button
- Press to Toggle through different information on playback
- Press for 2 second to cycle through brightness level.
4. LED Display (8 Digit 14 Segment)
5. Volume Knob (w/ LED)
- When master volume is muted, either from desktop/
mobile or turning the knob physically, the knob LED will
be Blinking White.
6. Microphone Mute Button (w/ LED)
- Press to mute and unmute microphone
7. Microphone Gain Knob
8. Headphone Gain Switch
- Toggles between normal or high gain mode
9. Headphone /Speaker Button
- Press to toggle between headphone or speaker mode
10. Direct/DSP Button
- Press to toggle between direct audio or DSP mode.
11. EQ Button
- Press to cycle between EQ presets
12. PC/Console Switch
- Toggle between PC and Console usage scenarios / setting
13. Microphone In Jack
14. Headphone Out (Unbalanced) Jack
15. Headphone Out (Balanced) Jack
Note : - The headphone (balanced) output will always have
higher priority than the headphone (unbalanced) output.
Both of headphone outputs are mutually exclusive.
Hence, if the headphone (balanced) jack is plugged in,
the headphone (unbalanced) jack will be muted. If not,
the audio will always output from the headphone
(unbalanced) jack. Auto switch to HP output when HP
Out jacks detected.