Advertisement
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
INFORMATION
This product is intended for a maximum weight of 30 kg. Do not exceed this weight.
Due to the size of this product we recommend that it is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools. plenty of space and a clean, dry area for
assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to
prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools not included.
WARNING
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing,damaged or worn.
DO NOT sit or stand on the product.
DO NOT place very hot or very cold items on the glass surface(s) unless adequately thick tablemats are used
to prevent such items from coming into contact with the glass.
DO NOT strike the glass with hard or pointed items, or use the glass as a chopping surface.
lf a glass component is chipped or broken,stop using the product and consult the manufacturer or supplier.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
When cleaning glass panels or mirrors use a damp cloth with washing up liquid or soft soap if necessary; do
not use washing powders or any other substances containing abrasives since these substances scratch glass.
SHAKER DRESSER & STOOL
ASSEMBLY INSTRUCTIONS
FUTURE REFERENCE.
Batch No.:V2 - 07/20
Page 2 of 10
Advertisement
