Page 2
Dear Customer! The STEAMY PR is the perfect tool or paper restorators to remove glue from old and precious paper documents with finely dosed steam, providing for optimum temperature and humidity level. Any other use or use beyond this is deemed improper. For resulting damage the user/operator of this device is solely responsible.
Version with fine nozzle for paper restoration Fine nozzle Version with flat nozzle Flat nozzle Technical Data Line voltage 230 V/50–60 Hz Current consumption 2.300 W Height / width / depth 420 / 300 / 350 mm Weight 14 kg Pressure 4 bar Temperature...
Safety Notes General Safety Notes • All equipment undergoes final inspection and testing before leaving our factory. However, if equipment is damaged during shipping or through any other circumstances, it must not be used in service. Please check the device regularly for damages. Damaged parts should be replaced immediately.
Specific Safety Notes Note: • Keep a safe distance of at least 100 cm from the safety valve (Back oft he device) to circulation areas or workplaces – Danger of scalding. • Ground yourself by laying your flat hand on the steam cleaner’s housing. (Gases or fluids glowing through pipes generate static electricity.
Installation The equipment delivered is ready for immediate use. The sealed plug can be connected directly to the mains supply 230 V/16 A. For installation please refer to chapter 2. Operation Chronological run of operation 1. Operate the device only when it’s filled with water. (Pay attention to safety notes in chapter 2) In order to avoid an unwanted dry-run, a daily filling in the morning is recommended.
Decalcifying the device when not using distilled water 1. Turn switch POWER (2) off. 2. Let the device cool itself down and empty the tank. 3. Fill the tank with decalcifier according to manufacturer’s instructions! 4. Close tank cap (6). 5.
Troubleshooting Device cannot be switched on. a. Check fuse of the building. b. Check device’s fuse Safety valve (10) opens or water leaks out. a. Turn the control unit (5) down and call customer service. ATTENTION: If used, do not remove cover and do not close opening.
Clean the housing regularly with a moist cloth. Note Clean and protect your device regularly with the REITEL stainless steel care spray (Order-No.: 90405000) to remove lime plaster and dust as well as other contaminants from the surface of equipment and to prevent corrosion. The spray creates a lasting,...
Warranty We, REITEL Feinwerktechnik GmbH, offer a 1 year’s warranty beginning from the proven date of purchase. This warranty covers all defects traceable to materials, design or workmanship. The following warranty regulations are applicable: Within the warranty period Reitel Feinwerktechnik GmbH or an authorized distributor agrees at its sole option, to perform repair or replace this product at no charge covering all defects traceable to materials, design or workmanship.
Page 14
REITEL Feinwerktechnik GmH; − The warranty does not cover the cost of removal and replacement of parts and accessories, unless supplied as original equipment by REITEL Feinwerktechnik GmbH − All kind of damages occurred not directly at the device as well as consequential damages (e.g.
Page 15
Should you need to borrow a device while your device is being repaired, please contact Messrs. REITEL or your distributor. These loans are a service for which availability cannot necessarily be guaranteed. After the warranty period, a free may be charged for loan...
Disposal Regulations According to valid laws our devices are disposed of according to B2B – Regulations for proper disposal. Please contact your local dealer for additional information.
Spare Parts List Best.-Nr.: Menge Ref.: Qty. Unit E6220810 Drehknopf / Rotary knob St./pc. E6227420 Dampfkesselbaugruppe mit SHV + Druckschalter, inkl. St./pc. E62277 / Tank with safety valve + pressure switch, incl. E62277 E6221500 Dichtung für Flansch / Sealing for flange St./pc.
Page 18
E6062020 Temperaturbegrenzer / Temperature limiter St./pc. E6175600 Transformator für Schlauchheizung 24 V/75 W / St./pc. Transformer for hose heating 24 V/75 W E6175500 Verschraubung UNI - VS 13 ohne DK, (030) / Screw St./pc. joint UNI - VS 13 without DK, (030) E7090000 Verschraubungen, bitte Form angeben / Screw joint, pls.
Need help?
Do you have a question about the STEAMY PR 1 and is the answer not in the manual?
Questions and answers