Advertisement
*CAUTION*
The hand vacuum is a powerful unit. Be sure to hold it firmly, as it can slip from
your hand and may cause injury.
AlSO...Ensure the Dust Cup opening and all Accessories are free of obstructions
at all times. If clogged, the motor will overheat and could become damaged.
9
Operating the Multi-Function
Hand Vacuum
Whether you are using as a Vacuum or Blower, the operational
steps are the same as listed below
• Hold the vacuum firmly using the Handle.
• Plug Power Cord in an electrical outlet.
• Slide the Power Switch to the "On" position and begin
vacuuming or blowing.
• When finished, turn Switch "Off", unplug unit, bundle power cord
and place unit in a cool, dry location.
10
Emptying Dust Cup & Cleaning Filter
NOTE: we recommend replacing
the Dust Cup filter every three
(3) months to ensure peak
performance of the unit.
12
Operation & Cleaning & Maintenance
A. Remove Dust Cup
Push Dust Cup Release at top and remove Dust
Cup from vacuum (see image at left).
B. Remove Filter from
Dust Cup
Lift Filter from
top of Dust Cup.
C. Empty Debris from
Dust Cup and Filter
Brush off clinging dirt and dust
from the outside of the Filter
and empty debris
in trash can.
Advertisement
