12.4 Starting the program
Required:A program is set.
→ "Set program", page 28
onStart/ Refillto press.
▶
aThe display shows the program
duration function ready in time. a
After the program end, it shows
display: "End" .
Remark:When "Hot" appears, the
appliance is cooling the laundry.
When "Hot" goes out, the laundry has
cooled down.
12.5 Adding laundry
You can always remove or add the
laundry after the program has started.
onStart/ Refillto press.
1.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum.
If you want to avoid or abort the
cooling process, open the door.
→ "Display", page 18
Open the door.
2.
Reload or remove the laundry.
3.
Close the door.
4.
onStart/ Refillto press.
5.
12.6 Program Cancel
onStart/ Refillto press.
1.
Open the door.
2.
Remove the laundry.
3.
→
"Taking out the laundry",
Page 29
12.7 Taking the laundry
Open the door.
1.
from
Remove the laundry from the
2.
drum.
12.8 Switching off the device
▶
Turn the program selector onOutto
make.
12.9 Fluff filter
During drying, the fluff from the
laundry is collected in the fluff filter.
The fluff filter protects the device
against fluff.
Cleaning the fluff filter
When the drying program is finished
or if the display shows a message
during use, clean the fluff filter.
Remark:If you do not clean the device
as described, the device function may
be impaired.
Requirements
sThe display shows after drying:
"end"
sor during use: .
Open the door.
1.
Remove the fluff from the door.
2.
ServiceNL
29